Verizon Wireless Network_Extender_Business Manuale Utente

Wall and Ceiling Mount Bracket Installation GuidePROCESSCYANPROCESSMAGENTAPROCESSYELLOWPROCESSBLACKJob NumberFile Name DateRev No.DescriptionProductio

171610. Confirm the proper installation of both cables to the attached Network Extender.9. Connect the Power and Ethernet cable connectors (previously

19183. Position the opening in the ceiling to match the opening on the top of the cover.4. Locate and install the Drywall Anchors into the ceiling sur

21202. Thread the Ethernet cable and Power cable through the Housing and out the bottom cable opening. 3. Insert the splitter component into the Housi

23225. Secure the Top Cover to the enclosure using the three Securing Screws.4. Assemble the POE Splitter to the Top Cover as shown.Securing Screws (3

25247. Align the Fixed Buttons to their corresponding opening alongside the Network Extender.8. Press each Fixed Button until it snaps into its secure

272610. Confirm the proper installation of both cables to the attached Network Extender.9. Connect the Power and Ethernet cable connectors (previously

29283. Locate and install the Drywall Anchors into the wall surface. 4. Align the screw holes between the Drywall Anchors and Top Cover. NOTE: The Dry

31302. Thread the Ethernet cable and Power cable through the Housing and out the bottom cable opening. 3. Insert the splitter component into the Housi

33325. Secure the Top Cover to the enclosure using the three Securing Screws.4. Assemble the POE Splitter to the Top Cover as shown.Securing Screws (3

35347. Align the Fixed Buttons to their corresponding opening alongside the Network Extender.8. Press each Fixed Button until it snaps into its secure

1ContentBasicsProvides a description of what is in the installation box, an overview of your installation components, and a brief overview of the diff

373610. Confirm the proper installation of both cables to the attached Network Extender.9. Connect the Power and Ethernet cable connectors (previously

38GPS Cable Installation1. Remove the GPS Extension cable cover.2. Install the connector to the available port.3. Re-install the cover back onto the N

© 2012 Verizon Wireless. All Rights Reserved. Todos los derechos reservados.PP_SAM_Network_Extender_BCNE8_75x105_V0_R2.indd 40 6/28/12 12:53 PM

32BasicsBracket FeaturesRail BracketSplitter Enclosure—bodyPOE Splitter EnclosureRail BracketEthernet PortLAN Port (network)Power PortSplitter Enclosu

54InstallationThis section covers the installation procedures for all three available mounting scenarios:• Floating Ceiling Bracket Mounting• Fixed

764. With the bracket placed securely on the rail, pull the bracket measurement tongs outwards to close the bracket onto the rail.5. Tighten the rail

989. Thread the LAN Ethernet cable (from your local network) through the cable opening on the Top Cover.8. Insert and tighten the previously removed s

11102. Thread the Ethernet cable and Power cable through the Housing and out the bottom cable opening. 3. Insert the splitter component into the Housi

13125. Secure the Top Cover to the enclosure using the three Securing Screws.4. Assemble the POE Splitter to the Top Cover as shown.Securing Screws (3

15147. Align the Fixed Buttons to their corresponding opening alongside the Network Extender.8. Press each Fixed Button until it snaps into its secure